Height gauge µHITE 160, range 0-100 mm or 0-4 in, IP50
MSA15.491
Height Gauge µHITE 160
The µHITE 160 height gauge features a compact design with a measuring stand included.
Ideal for small parts and when a low measuring force is required. The system is perfect for measuring straightness, flatness, and parallelism or inspecting axial and radial runouts depending on the tool configuration.
Features:
- Granite measuring table 200 x 300 x 50 mm (W x D x H)
- Dull-chrome plated steel column Ø 50 x 300 mm, hardened and ground
- Fixing for measuring inserts Ø 6 mm x length 10 mm
- Ideal for work piece inspection close to the production area
- Application range from 0 to 160 mm or 0 to 6.3"
- Digital display: 0.001 mm and 0.0001 mm or 0.0001 in and 0.00001"
- Maximum permissible error of 2 µm (1 µm when checking coaxiality) with CAA
- Temperature sensor integrated
- Motorised measuring head for fast and reliable probing
- Automatic value capture
- RS232 data output with direct connection to TESA PRINTER SPC
- Memory for 99 single values
Technical Data
Details
Features :
- Ideal for work piece inspection close to the production area
- Application range from 0 to 160 mm or 0 to 6.3"
- Digital display : 0.001 mm and 0.0001 mm or 0.0001 in and 0.00001"
- Maximum permissible error as low as 2 μm (or 1 μm when checking coaxiality) thanks to the automatic correction of systematic errors by CAA (Computer Aided Accuracy)
- Integrated temperature sensor so that the coefficient of linear expansion of each gauge unit matches that of steel (11,5 x 10-6 K-1)
- Motorised measuring head for fast probing at each point
- Automatic value capture, controlled over the stability of the measuring force, but also all measured values
- Constant measuring force through the motor-driven actuator. Switchable
- No manual calculation needed
- RS232 data output with direct connection to TESA PRINTER SPC
- Memory capacity for 99 single values.